LogicMachine5 KNX CANx Controller (LM5p2-KC)
- KNX Secure
AED 6,710.00
Incl. 5% VAT: AED 319.52
Need a quote for a project or a larger quantity?
- Collect: From our Dubai office
- Delivery: By courier on request, at the carrier's rate. Other GCC countries: your own courier collects from our office.
-
Availability and lead time are confirmed after you order - Returns: Refund policy
Documents
- LM5p2-KC datasheet
- LogicMachine comparison table
- Safety information, installation and general cybersecurity guidelines
Documents are published by the manufacturer. Check the revision for your project.
Specifications
| Manufacturer | LogicMachine |
|---|---|
| Category | Servers & logic controllers |
| SKU | LM5p2-KC |
| KNX Secure | Yes |
| Shipping weight | 137 g |
Source: manufacturer product data.
Overview
The controller to start with when the project will grow through CANx modules. The LogicMachine5 KNX CANx (LM5p2-KC) adds a CAN FT port to KNX/TP and has no DALI or on-board I/O of its own: expansion goes through the CANx range.
- CAN FT port for CANx. CANx devices sit on the CAN FT bus of a LogicMachine that has a CAN FT port. The LM5Lp2, LM5p2-DW1 and LM5p2-PMC have no CAN FT port.
- Three serial ports, Modbus and BACnet. Two RS-485 ports and one RS-485 / RS-232 port that switches in software. BACnet/IP server and Modbus RTU/TCP master are built in; Modbus slave and BACnet client use the vendor's script libraries. Binary and numeric KNX objects with Export enabled can be read by a BACnet/IP client. The vendor lists native support for KNX, Modbus, BACnet and MQTT.
- Applications and scripts. The vendor's application store offers pre-built applications, and Lua scripts cover site-specific logic.
- Remote programming. Built-in WireGuard, OpenVPN and ZeroTier clients; the datasheet lists KNX device programming from a distance over VPN or ZeroTier.
Where it fits in UAE projects
- Hotel and apartment-tower projects where room control stays on KNX and the specification asks for a BACnet/IP link to the BMS.
- Plant rooms where RS-485 Modbus devices and an RS-232 device sit next to a KNX line.
- Phased fit-outs: install the controller with the first KNX floor and add CANx extension modules on the CAN FT bus as later phases arrive.
Same CAN FT bus, different jobs: the LM5p2-KCD adds a DALI line and the Reactor IO V3 LM5p2-RIO3 adds 16 analog-input-or-digital-output channels. The whole range is under LogicMachine.
Specifications
| Specification | Value |
|---|---|
| General | |
| Article number | LM5p2-KC |
| Product range | LogicMachine5 KNX CANx |
| Manufacturer | Embedded Systems SIA, Riga, Latvia |
| Physical interfaces | |
| KNX/TP | 1 |
| CAN FT | 1 |
| RJ45 | 1 (10/100M Ethernet, passive PoE support) |
| RS-485 | 2 |
| RS-485 / RS-232 | 1 (switchable in software) |
| USB 2.0 | 1 |
| Power | |
| Power supply | 24 V DC via terminals or passive PoE |
| Power consumption | 1.1 W (minimum, no external load) |
| Connections | |
| KNX bus / CAN FT bus | Bus connection terminal, 0.8 mm² |
| Power supply and I/O ports | Screw terminals, 0.8 mm² .. 1.5 mm² |
| Indicators | |
| LED 1 | Green – System load |
| LED 2 | Green – Normal operation / Red – Reset |
| Enclosure | |
| Mounting support | DIN rail |
| DIN module width | 4 |
| Dimensions WxHxD | 72 x 112 x 61 mm |
| IP degree of protection | IP20 |
| Net weight | 137 g |
| Standards compliance | |
| EMC | EN61000-6-1; EN61000-6-3 |
| Environment | |
| Operational temperature | 0 °C .. +45 °C |
| Storage temperature | -15 °C .. +55 °C |
| Relative humidity | 0% ... 93% (without condensation) |
| Warranty | 2 years |
Installation notes
- CANx devices need a LogicMachine with a CAN FT port for commissioning and for connecting to other protocols, according to the vendor's CANx page.
Documents and safety
- LM5p2-KC datasheet (PDF, 2026-11-05)
- LogicMachine comparison table (PDF)
- Safety information, installation and cybersecurity guidelines
Embedded Systems SIA equipment must be installed, operated, serviced and maintained only by qualified personnel.
Embedded Systems SIA equipment is not rated, tested or certified for use in life-safety, mission-critical or fail-safe operational environments.