White Creatrol Mini PIR curtain motion sensor for KNX, with spring mounting clips

Creatrol Mini PIR Curtain Motion Sensor (KNX)

SKU: 60.99.1213

Light level sensor

AED 690.00

Incl. 5% VAT: AED 32.86

Need a quote for a project or a larger quantity? Request a project quote

Collect: From our Dubai office
Delivery: By courier on request, at the carrier's rate. Other GCC countries: your own courier collects from our office.
Availability and lead time are confirmed after you order
Returns: Refund policy

Specifications

Specifications: Creatrol Mini PIR Curtain Motion Sensor (KNX)
Manufacturer	Creatrol
Category	Presence & motion detectors
Finish	White
Finish family	White
SKU	60.99.1213
Built-in sensors	Light level

Source: manufacturer product data.

Overview

Sense along a line, not across a room. The Creatrol Mini PIR Curtain narrows the PIR field to 20°: at 3 m mounting height Creatrol's detection drawing shows a strip about 6 m long and 0.9 m wide. Mount it above a corridor, a stair or a doorway and it reacts to movement along that path. Four lighting channels and a 0 to 32,000 lux sensor are built into the same Ø35 mm unit.

A 20° curtain. Detection angle 20°. At 3 m mounting height the spec sheet drawing shows a strip 6 m long and 0.9 m wide, so the field follows the walkway instead of filling the room.
Light level on board. Built-in lux measurement, 0 to 32,000 lux (accuracy ±4 %), for lighting automation that follows ambient light as well as movement.
Four channels, your logic. Four independent lighting-control channels; Fully Automatic, Semi-Automatic, Master/Slave and Day/Night modes; built-in logic with manual mode and independent event outputs; external inputs can change parameters dynamically. Easy mode for a quick start, Advanced mode for multi-channel output.
ETS and IR remote. Creatrol lists ETS debugging support, and parameter configuration and status readout via an IR remote control (RC1, Creatrol P/N 60.99.00C1, optional accessory).
Same compact body as the PIR 360. Ø43 × 35 mm, 24.5 g, Ø35 mm cut-out, spring clips, white or black housing. Creatrol's optional kits allow surface, wall or universal-bracket mounting.

Where it fits in UAE projects

Corridors and hallways in villas, hotels and offices.
Stair flights and landings.
Doorways and entrance passages.

This is a motion sensor: it reacts to movement. For a field that covers a whole room, see the Mini PIR 360.

Specifications

Creatrol P/N	60.99.1213 (white) · 60.9B.1213 (black)
Model	CTL-SEN-Mini/1213 · CTL-SEN-Mini/1213B
Communication	KNX TP
Input voltage (KNX bus)	DC 21 to 30 V
Operating current	≤ 10 mA
Detection mode	Pyroelectric infrared receiver (PIR)
Detection angle	20°
Detection area (drawing)	At 3 m installation height, a strip 6 m long and 0.9 m wide
Mounting	Recessed ceiling mount, mounting height 2.0 to 3.2 m
Illuminance monitoring	0 to 32,000 lux (accuracy ±4 %)
Lighting channels	4 independent channels
Delay time	1 to 3,600 s
Indicator	LED
Dimensions	Ø43 × 35 mm
Cut-out	Ø35 mm
Weight	24.5 g
Bus connection	Terminal red / black, Ø0.6 to 0.8 mm; programming button for physical address assignment
Operating environment	Indoor, −20 to 45 °C, < 95 % RH (non-condensing)
Storage temperature	−40 to 85 °C
Protection	IP20
Housing	PC, white / black

Installation notes

Keep away from moving objects such as pets or swinging curtains, and from rapid temperature changes such as AC vents and heat sources.
Mount on a firm, vibration-free surface. Disconnect power before wiring.
KNX bus only: the wiring diagram in Creatrol's spec sheet shows a KNX power supply and no auxiliary supply.

Source: Creatrol spec sheet CTL-SEN-Mini/1213, revision 8 May 2026.

Official Creatrol KNX partner in the UAE.