LogicMachine5 KNX CANx DALI Controller (LM5p2-KCD)
- KNX Secure
AED 7,025.00
Incl. 5% VAT: AED 334.52
Need a quote for a project or a larger quantity?
- Collect: From our Dubai office
- Delivery: By courier on request, at the carrier's rate. Other GCC countries: your own courier collects from our office.
-
Availability and lead time are confirmed after you order - Returns: Refund policy
Documents
- LM5p2-KCD datasheet
- LogicMachine comparison table
- Safety information, installation and general cybersecurity guidelines
Documents are published by the manufacturer. Check the revision for your project.
Specifications
| Manufacturer | LogicMachine |
|---|---|
| Category | Servers & logic controllers |
| SKU | LM5p2-KCD |
| KNX Secure | Yes |
| Shipping weight | 136 g |
Source: manufacturer product data.
Overview
One DALI line, a CAN FT port and KNX/TP in a 4 DIN controller. The vendor's hardware page lists the DALI port of the LogicMachine5 KNX CANx DALI (LM5p2-KCD) as "DALI x 1 (DALI2 supported)", and the CAN FT port is there for later expansion.
- CAN FT for expansion. The CAN FT port connects CANx extension modules, which sit on the CAN FT bus of a LogicMachine. The vendor's CANx range includes a DALI gateway.
- Scenes and schedules. Scenes control several data points at once or run timed sequences, and the scheduler starts events by time or at sunrise and sunset. Lua scripts hold the remaining logic.
- Visualisation for staff and owners. The built-in visualisation targets PCs, touch devices and big screens, locally and remotely.
Where it fits in UAE projects
- Offices and show suites with a DALI lighting zone next to KNX blinds and room controls, held by one controller.
- DALI panels in hospitality back-of-house, with plant read over Modbus RTU on the RS-485 port.
The LM5p2-DW1 has two DALI lines, but the vendor lists them as "DALI2 not supported". Stand-alone DALI interfaces are under KNX DALI gateways.
Specifications
| Specification | Value |
|---|---|
| General | |
| Article number | LM5p2-KCD |
| Product range | LogicMachine5 KNX CANx |
| Manufacturer | Embedded Systems SIA, Riga, Latvia |
| Physical interfaces | |
| KNX/TP | 1 |
| CAN FT | 1 |
| RJ45 | 1 (10/100M Ethernet, passive PoE support) |
| RS-485 | 1 |
| RS-485 / RS-232 | 1 (switchable in software) |
| USB 2.0 | 1 |
| DALI | 1 |
| DALI2 | Supported |
| Power | |
| Power supply | 24 V DC via terminals or passive PoE |
| Power consumption | 1.3 W (minimum, no external load) |
| Connections | |
| KNX bus / CAN FT bus | Bus connection terminal, 0.8 mm² |
| Power supply and I/O ports | Screw terminals, 0.8 mm² .. 1.5 mm² |
| Indicators | |
| LED 1 | Green – System load |
| LED 2 | Green – Normal operation / Red – Reset |
| Enclosure | |
| Mounting support | DIN rail |
| DIN module width | 4 |
| Dimensions WxHxD | 72 x 112 x 61 mm |
| IP degree of protection | IP20 |
| Net weight | 136 g |
| Standards compliance | |
| EMC | EN61000-6-1; EN61000-6-3 |
| Environment | |
| Operational temperature | 0 °C .. +45 °C |
| Storage temperature | -15 °C .. +55 °C |
| Relative humidity | 0% ... 93% (without condensation) |
| Warranty | 2 years |
Installation notes
- The DALI-2 note is on the vendor's hardware page; the datasheet lists the DALI line without it. Neither gives the number of DALI devices per line or the DALI-2 device types the controller handles. Confirm both with the vendor before sizing the line.
Documents and safety
- LM5p2-KCD datasheet (PDF, 2026-11-05)
- LogicMachine comparison table (PDF)
- Safety information, installation and cybersecurity guidelines
Embedded Systems SIA equipment must be installed, operated, serviced and maintained only by qualified personnel.
Embedded Systems SIA equipment is not rated, tested or certified for use in life-safety, mission-critical or fail-safe operational environments.