White Creatrol Mini ToF ranging occupancy sensor for KNX, with spring mounting clips

Creatrol Mini ToF Ranging Occupancy Sensor (KNX)

SKU: 60.99.7113

Light level sensor

AED 550.00

Incl. 5% VAT: AED 26.19

Need a quote for a project or a larger quantity? Request a project quote

Collect: From our Dubai office
Delivery: By courier on request, at the carrier's rate. Other GCC countries: your own courier collects from our office.
Availability and lead time are confirmed after you order
Returns: Refund policy

Specifications

Specifications: Creatrol Mini ToF Ranging Occupancy Sensor (KNX)
Manufacturer	Creatrol
Category	Presence & motion detectors
Finish	White
Finish family	White
SKU	60.99.7113
Built-in sensors	Light level

Source: manufacturer product data.

Overview

Occupancy by distance, not only by movement. The Creatrol Mini ToF is a ceiling sensor with a 940 nm Time-of-Flight sensor. It measures the distance to a target from 0.1 to 3.2 m inside a narrow 20° zone, a spot about 0.4 m across in Creatrol's top-view drawing, so one unit can watch one desk. It also measures ambient light and supports four lighting channels over KNX.

Measures distance, 0.1 to 3.2 m. Time-of-Flight detection from sensor to target, detection angle 20°, detection coverage ≤ 0.4 m, update rate 15 Hz / 30 Hz.
Presence, occupancy, approach, departure. Creatrol lists detection of these four states, and describes static presence and position within a defined zone.
Light level and four channels. Built-in lux measurement, 0 to 32,000 lux (accuracy ±4 %). Four independent lighting-control channels; Fully Automatic, Semi-Automatic, Master/Slave and Day/Night modes; built-in logic with manual mode and independent event outputs; external inputs can change parameters dynamically. Easy mode for a quick start, Advanced mode for multi-channel output.
ETS and IR remote. Creatrol lists ETS debugging support, and parameter configuration and status readout via an IR remote control (RC1, Creatrol P/N 60.99.00C1, optional accessory).
Small and flexible to mount. Body Ø43 × 35 mm, 27 g, Ø35 mm cut-out, spring clips. Creatrol's optional kits allow surface, wall or universal-bracket mounting. White or black housing.

Where it fits in UAE projects

Individual workstations and hot desks in offices, the case shown in Creatrol's detection drawing.
Seats at meeting-room tables.
Any position where one spot, not a whole room, should decide the lighting.

For corridors and general circulation areas, see the Mini PIR 360.

Specifications

Creatrol P/N	60.99.7113 (white) · 60.9B.7113 (black)
Model	CTL-SEN-Mini/7113 · CTL-SEN-Mini/7113B
Communication	KNX TP
Input voltage (KNX bus)	DC 21 to 30 V
Operating current	≤ 10 mA
Detection mode	ToF (Time of Flight) sensor
Light source	940 nm
Laser safety	Class 1 (IEC 60825-1:2014)
Update rate	15 Hz / 30 Hz
Detection angle	20°
Detection coverage	≤ 0.4 m
Detection range	0.1 to 3.2 m (sensor to target)
Mounting	Recessed ceiling mount, mounting height 2.0 to 4.0 m
Illuminance monitoring	0 to 32,000 lux (accuracy ±4 %)
Lighting channels	4 independent channels
Delay time	1 to 3,600 s
Indicator	LED
Dimensions	Ø43 × 35 mm
Cut-out	Ø35 mm
Weight	27 g
Bus connection	Terminal red / black, Ø0.6 to 0.8 mm; programming button for physical address assignment
Operating environment	Indoor, −20 to 45 °C, < 95 % RH (non-condensing)
Storage temperature	−40 to 85 °C
Protection	IP20
Housing	PC, white / black

Installation notes

Avoid moving objects, direct light and reflections in the detection zone. Dark materials may reduce sensitivity.
Keep the lens free of heavy soiling and scratches, which can compromise detection accuracy.
Mount at least 30 cm above the floor with 1 m clearance from walls or obstacles, and keep the view of the detection zone unobstructed.
KNX bus only: the wiring diagram in Creatrol's spec sheet shows a KNX power supply and no auxiliary supply.

Source: Creatrol spec sheet CTL-SEN-Mini/7113, revision 19 Nov 2025.

Official Creatrol KNX partner in the UAE.