White Creatrol Mini PIR 360° motion sensor for KNX, with spring mounting clips

Creatrol Mini PIR 360 Motion Sensor (KNX)

SKU: 60.99.1113

Light level sensor

AED 690.00

Incl. 5% VAT: AED 32.86

Need a quote for a project or a larger quantity? Request a project quote

Collect: From our Dubai office
Delivery: By courier on request, at the carrier's rate. Other GCC countries: your own courier collects from our office.
Availability and lead time are confirmed after you order
Returns: Refund policy

Specifications

Specifications: Creatrol Mini PIR 360 Motion Sensor (KNX)
Manufacturer	Creatrol
Category	Presence & motion detectors
Finish	White
Finish family	White
SKU	60.99.1113
Built-in sensors	Light level

Source: manufacturer product data.

Overview

Watch a room from the ceiling with a unit that needs only a Ø35 mm cut-out. The Creatrol Mini PIR 360 senses movement through a full 360° field, up to 6 m across at 3 m mounting height. It measures ambient light from 0 to 32,000 lux and supports four independent lighting channels on the KNX bus. White or black housing.

360° view, up to 6 m across. At 3 m mounting height the motion detection diameter is up to 6.0 m. Creatrol designed the quad-element PIR to improve detection of radial movement and to minimise blind spots.
Light level on board. Built-in lux measurement, 0 to 32,000 lux (accuracy ±4 %), for lighting automation that follows ambient light as well as movement.
Four channels, your logic. Four independent lighting-control channels; Fully Automatic, Semi-Automatic, Master/Slave and Day/Night modes; built-in logic with manual mode and independent event outputs; external inputs can change parameters dynamically. Easy mode for a quick start, Advanced mode for multi-channel output.
ETS and IR remote. Creatrol lists ETS debugging support, and parameter configuration and status readout via an IR remote control (RC1, Creatrol P/N 60.99.00C1, optional accessory).
Small and flexible to mount. Body Ø43 × 35 mm, 24.5 g, held by spring clips. Creatrol's optional kits allow surface, wall or universal-bracket mounting.

Where it fits in UAE projects

Hallways, landings and utility rooms in villas and apartments.
Corridors, lobbies and store rooms in offices.
Back-of-house corridors and service areas in hotels.

This is a motion sensor: it reacts to movement. For a person sitting still at a desk, see the Mini ToF occupancy sensor. For a narrow strip such as a corridor or stair, see the Mini PIR Curtain.

Specifications

Creatrol P/N	60.99.1113 (white) · 60.9B.1113 (black)
Model	CTL-SEN-Mini/1113 · CTL-SEN-Mini/1113B
Communication	KNX TP
Input voltage (KNX bus)	DC 21 to 30 V
Operating current	≤ 10 mA
Detection mode	Pyroelectric infrared receiver (PIR)
Detection angle	360°
Detection range	At 3 m installation height, motion detection diameter ≤ 6.0 m
Mounting	Recessed ceiling mount, mounting height 2.0 to 3.2 m
Illuminance monitoring	0 to 32,000 lux (accuracy ±4 %)
Lighting channels	4 independent channels
Delay time	1 to 3,600 s
Indicator	LED
Dimensions	Ø43 × 35 mm
Cut-out	Ø35 mm
Weight	24.5 g
Bus connection	Terminal red / black, Ø0.6 to 0.8 mm; programming button for physical address assignment
Operating environment	Indoor, −20 to 45 °C, < 95 % RH (non-condensing)
Storage temperature	−40 to 85 °C
Protection	IP20
Housing	PC, white / black

Installation notes

Keep away from moving objects such as pets or swinging curtains, and from rapid temperature changes such as AC vents and heat sources.
Mount on a firm, vibration-free surface. Disconnect power before wiring.
KNX bus only: the wiring diagram in Creatrol's spec sheet shows a KNX power supply and no auxiliary supply.

Source: Creatrol spec sheet CTL-SEN-Mini/1113, revision 19 May 2026.

Official Creatrol KNX partner in the UAE.